Download ScanMaster ELM 2.1 keygen ScanMaster ELM software full ScanMaster ELM V2.1 ELM327 ScanMaster ELM V2.1 with keygen.
![]()
ScanMaster-ELM Free download
ATTENTION: THIS IS NOT A DEMO SOFTWARE!!!!
ScanMaster-ELM is a OBD-2/EOBD diagnostic scan tool for vehicle diagnostics under OBD-II/EOBD standards that were developed specifically for the ELM327 chip from the company ELM Electronics and supports all 10 in SAE J1979 defined OBD-2 diagnostic modes $01 – $0A and all communications protocols.
Detailed program description and images you find on the left menu under “Products/ScanMaster-ELM”.
Key Features
Language: English / German / Czech / Danish / Spanish / French / Croatian / Hungarian / Italian / Polish / Serbian
Operation system: Windows 2000, XP, 2003, Vista, 7, 8, 8.1, 10 (32 and 64bit)
Supported interfaces: all based on ELM327 chip with serial, USB, BlueTooth or WLAN (WiFi) interface.
Updates: all updates are free of charge. You get the older versions v1.9, v2.1 for Win XP and also all newer versions – v4, v5, v6 and newer.
STEP 1: Download and Install Latest Tested ELM-327 Driver Files
(Cable should NOT be connected to your laptop yet. Only connect it when instructions say so.)
Windows XP, Vista, 7:
If you bought genuine ELM327 cable from Total Car Diagnostics — then you only need to install DRIVER PACK 3. After install — go straight to Step 2 to test if it's working.
—
![]()
If you bought ELM327 cable from elsewhere (clones, eBay, other manufacturers) then install all Driver Packs below, because they cover widest range of chip makers...
That's it!
Go to Step 2 below to test if everything is working ok...
Windows 8, 10:
If you bought genuine ELM327 cable from Total Car Diagnostics here, then you only need to install DRIVER PACK 3. Then go straight to Step 2 to test it's working ok.
—
If you bought ELM327 cable from elsewhere (clones, eBay, other manufacturers) then install all Driver Packs below, because they cover widest range of chip makers...
That's it!
Go to Step 2 below to test if everything is working ok...
STEP 2: Test if ELM327 USB Cable is Installed Correctly
(You can now CONNECT your ELM327 USB cable to any port on the laptop.)
Ok, we're almost ready to start scanning your vehicle.
First, let's ensure that everything is working fine!
Here's how...
Windows Vista/7/8/10: Control Panel » System » Device Manager
Windows XP: Control Panel » System » 'Hardware' tab » Device Manager
Step 2: Expand 'Other Devices' and 'Ports (COM & LPT)'
Notice any device with any one of the following names:
NONE of above devices should have a yellow mark () next to them.
If none of the above has a yellow mark, then congratulations! You're ready to begin scanning your car(s). Click here on how to connect to your car in the next 5 minutes...
If any one of above devices has a yellow mark, then:
Even DRIVER PACK 6 didn't help? Then likely it's a 'Code 10 error' next to 'Prolific USB-to-Serial' device. Click here to fix that.
Even 'Code 10 error' fix didn't help and yellow mark () is STILL not gone? Go to Troubleshooting below.
How To Scan / Diagnose Any Car with OBD2 Software...
Step 1: Install your OBD2 software (if you don't have it — checkout TOAD OBD software). Do NOT launch it yet.
Step 2: Connect ELM327 USB to your computer and car's OBD port (usually underneat dashboard/steering wheel).
Step 3: Place the key in the ignition and turn it forward to 'ON' position. (Position where all dashboard lights are on. This is one position before engine starts.)
Step 4: Start your OBD diagnostic software. Click 'Connect', and it should auto-connect to your vehicle. That's it!
TIP: If you want maximum data reported from the car — turn on the engine.
Yes, you can safely drive the vehicle while ELM327 is plugged in and application is monitoring car's data. Keep eyes on the road at all times.
Common Solutions:
If you're unable to connect successfully to your car, then that's because of 2 reasons:
Here are solutions in recommended order:
Free Software To Test If ELM327 is Working with Windows and Vehicle...
Step 1: Install EasyOBD. Do not launch it until Step 4 below.
Step 2: Connect ELM327 USB cable to laptop and car.
![]()
Step 3: Turn on car ignition. (One step before engine turns on)
Step 4: Launch EasyOBD. It will automatically connect.
If first 3 lines are GREEN (as per below pic) — then ELM327/Windows is 100% installed correctly! In which case, click here on how to connect to your car in the next 5 minutes using proper OBD-II software...
If first 3 lines are not GREEN — refer to Common Solutions above.
First 3 green lines means your ELM327 cable/Windows is properly installed.
![]() Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
February 2023
Categories |